Ellettsville True Value Rental

Edco C-10 13 HP Gas 8" Crack Repair Saw

Crack Chaser Saws assist concrete floor repair by opening cracks for filling. Operators pull this saw through each crack pattern. 

**Specific V-Groove blades are AVAILABLE SEPARATE AND ARE NOT INCLUDED IN RENTAL.

FEATURES

Maximum depth of cut is 1"

Caster wheels allows operator to follow any random crack pattern

Combination depth control knob and engage/disengage lever allow exact depth cutting

Standard with dual 3" vac ports for dry cutting

Optional straight cutting wheel kit for straight cuts or joint cleaning using an 8" wire wheel

INSTRUCTIONAL VIDEO

Features

• 18" blade capacity
• New & Improved throttle cable
• Easy turn crank, for lowering and raising blades in and out of cut
• Screw boot belt tensioner prevents frame damage
• 7-gauge steel blade guard with welded protective segment flap
• Heavy-Duty lifting bail (optional)
• 13 HP gasoline engine
• Heavy-Duty 7-gauge steel laser cut frame
• Large screw-type depth control
• Wide-T handles with rubber grips
• High quality molded rubber wheels

Ideal For:

• Short-run slab cutting
• Contraction Joints
• Patch repairs in asphalt
• Traffic loop installation, and trenching
• 
  
• INSTRUCTIONAL VIDEO

EDCO CPM-8-9H GAS POWERED

Concrete planers (or Scarifier) utilize rotating circular cutting wheels to perform a variety of surface preparation functions, including milling misaligned sidewalks and joints, removing coatings and traffic lines, and grooving and texturing.

8" working width will scarify approximately 350-500 sq. ft. per hour at Depth Per Pass of 1/8".

Removes traffic lines at 800-1,000 lineal ft. per hour

Power source over drum to eliminate vibration and maximize surface contact

Front-mounted lifting handle makes loading and unloading easy

Vacuum port equipped

Click here for

INSTRUCTIONAL VIDEO

• • **BLADE IS SOLD AND/OR RENTED SEPERATELY $40.00 for rent $99.00 for purchase
    
  • 
    
• 14" WALK BEHIND CONCRETE SAW
• Heavy-Duty Anti-Vibration engine mount
• Screw boot belt tensioner prevents frame damage
• 14" blade capacity 
• 7-gauge steel blade guard with welded protective segment flap
• Heavy-Duty lifting bail
• 13 HP gasoline engine
• Heavy-Duty 7-gauge steel laser cut frame
• Large screw-type depth control
• Wide-T handles with rubber grips
• Solid-Steel lifting handles
• High quality molded rubber wheels 
• INSTRUCTIONAL VIDEO

8" Green concrete, Early entry, upcut blade for Soff-cut saw, 8 x .095 x 7/8 arbor

The GCT-8 Series III Early Entry Joint Saw, OR GREEN SAW, is raising the bar for dustless early entry concrete saws, built around excellent dust control and convenience for operator. 

8" blade capacity for 2" depth of cut, high quality design and build to hold up to jobsite conditions.

****BLADE RENTAL SEPARATE

18" Ultra Value diamond concrete cutting blade

CANYCOM SC75, 22HP track buggy powered wheelbarrow,

bucket cap 16.1 cubic ft., 180degree Pivoting Dump

SPECIFICATIONS

Diteq 8" floor grinder. 

8" DIAMOND BIT INCLUDED!!

12.8 AMP DRAW. PLUG IN ANYWHERE!!!

• Wet/Dry Use.
• New 1.5HP 13A Motor 
• 3" Vacuum Port &
• 1.75" Vacuum Port

66lbs , 8 AMP , HUSQVARNA S 13 

Quiet-operating single-phase HEPA dust collector to match the power cutter Husqvarna K 3000, hand held grinders, small grinders 5-7", small scarifiers and drywall sanders.  Equipped with a tested and certified HEPA H13 filter. Features include Jet Pulse pre-filter cleaning and vacuum meter for filter control. PAIRS WITH CONCRETE CUTTING AND GRINDING EQUIPMENT

Click here for SPECIFICATIONS

Husqvarna DC 1400 Lightweight Dry Vacuum Dust Management System, Capacity: 16 gal, 140 cfm, 1.9 hp, 1 Phase, 115 VAC, 12 A, 2 in Hose Diameter, 38 in Height, 22 in Width, 22 in Depth Use with wand or connect directly to equipment. PAIRS WITH CONCRETE CUTTING AND GRINDING EQUIPMENT

HUSQVARNA W 70 P Wet and Slurry vacuum *15-gallon tank and evacuation pump •Oil-cooled pump can handle concrete sludge, oils and cutting fluids •Powered by a 1.6 HP, 10 Amp, 120V electric motor •Pumping out of tank can take place at same time as suction Empties through large bottom valve for simple cleaning

50 ft extension cord

HUSQVARNA TS60 Wet cut tile saw for Ceramic, Marble, Pavers, and Brick up to 2 1/4" thick. 

Blade choice separate, see blade categories

INSTRUCTIONAL VIDEO

small electric hand held angle grinder.

Multiple different applications with this versatile power tool.

buff, grind, cut, score.

Bits are separate.

Multiple different applications with this versatile power tool.

buff, grind, cut, score. 

Bits are separate.

24in. broom squeegee

14" EDCO brick and or paving saw. Tile saw.  Complete with collapsible table. 

• Cutting interlocking pavers, brick, stepping and cultured stones
• Professional paver installers & manufacturers
• Landscape suppliers & Landscape services
• Masonry suppliers
• INSTRUCTIONAL VIDEO

CANYCOM SC75 , 22HP track buggy powered wheelbarrow,

bucket cap 16.1 cubic ft., STRAIGHT DUMP

SPECIFICATIONS

Spline drive Carbide Rotary Bits , sizes 3/4" - 1 1/2 "

5" Carbide Rotary Core Bit, 7" drilling depth

5" Carbide Rotary Core Bit, Drilling depth 17"

3 9/16" Carbide Rotary Core Bit, short, drilling depth of 7"

3 9/16" Carbide Rotary Core Bit, long, drilling depth of 17"